Analisis Kandungan Logam Berat Cu dan Zn dalam Air Limbah Industri
DOI:
https://doi.org/10.52759/reactor.v1i2.8Keywords:
Metal, WastewaterAbstract
Industrial wastewater is water from the processing of an industrial process. This type of water is classified as having poor quality because of the contaminants it contains. The contaminants contained in industrial water vary depending on the related processes that produced the water. This study aims to determine the concentrations of heavy metals Cu and Zn in industrial wastewater at three locations in Batam City. Wastewater testing was carried out using the ICP-AES. The results obtained indicate that the levels of Cu and Zn in the industrial wastewater samples at the three locations are still below the maximum concentration limit permitted by the Environmental Quality Standards and are in accordance with the Regulation of the Minister of Environment of the Republic of Indonesia No. 5 of 2014 Annex 47 About Wastewater Quality Standards.
References
Ginting, P. 2007. “Sistem Pengelolaan Lingkungan Dan Limbah Industri”. Cetakan Pertama. Bandung: Yrama Widya. Hal 37-200
Palar, H. Pencemaran & Toksikologi Logam Berat, Cetakan Kedua. Jakarta: PT Rineka Cipta, 2004
Hidayat, D dan M. Daus. “Kajian Kandungan Logam Berat Kadmium (Cd), Kromium (Cr) Dan Merkuri (Hg) Pada Sedimen Di Sungai Way Kuala Lampung Secara Spektrofotometri Serapan Atom”. Analit: Analytical and Environmental Chemistry Volume 4, No. 01. 2019.
Naschan, M., Agung T. P dan Woro S. “Validitas Analisis Fe Dalam Sedimen Sungai Kaligarang Dengan FAAS dan ICP-OES”. Indonesian Journal of Chemical Science. Vol 6 (1). 2017.
American Public Health Association (APHA). “Standard method for the examination of water and wastewater”. 21st edn. APHA, AWWA, WPCF. Washington. 2017.
