Pemisahan Butanol dari Campuran ABE Menggunakan Software Aspen Plus: Pengaruh Refluks Rasio terhadap Kandungan Butanol

Dennis Farina Nury, Pramahadi Febriyanto, Lisa Anggraini Ismi, Rahmat Taufik Hidayah

Abstract

Production of acetone-butanol-ethanol (ABE) through the fermentation process is one alternative that needs to be developed. Less economical in the ABE fermentation process is the difficulty of the separation process from the fermentation product and the by-products of the reaction. Among the separation process methods, such as extraction, distillation, adsorption, and gas stripping, the distillation method is still the most widely used method in the ABE separation process. The purpose of this study was to provide recommendations for predicting good ABE separation and producing optimum operating conditions to produce high % butanol content. Which is then simulated using Aspen Plus V11 software. This study varied the reflux ratio in the distillation column and the decanter operating temperature. The results showed that butanol purity reached 90.33% in the radfrac 1 column operated at a pressure of 1.3 atm with a reflux ratio of 5, the location of the 7th feed stage and the number of stages 11. Then proceed to the purification stage in the radfrac column 2 which is operated at a pressure of 2 atm with a reflux ratio of 5, the location of the 4th stage feed and the number of stages 5. The decrease in the reflux ratio of the radfrac column causes a decrease in the butanol content at the bottom so that the purity of butanol also decreases and decreases % recovery or recovery of butanol. This is also followed by the location of the feed stage, which is getting higher, and the number of stages is increasing.

Keywords

ABE Fermentation, Aspen Plus, Purity, Recovery Butanol, Reflux Ratio

Full Text:

PDF

References

R. R. Ginting, “Pengukuran dan Korelasi Kesetimbangan cairan - cairan sistem terner dimethyl carbonat + butanol +H2O pada 303.15-313.15 k dan tekanan amosferik,” Thesis.Surabaya Inst. Teknol. Sepuluh Nop., 2016.

Sulistyono, “Pemanasan Global (Global Warming) Dan Hubungannya Dengan Penggunaan Bahan Bakar Fosil,” J. Forum Teknol., vol. 02, no. 2, pp. 47–56, 2012.

M. N. Nurul Qomariyah, Karina Dania Agusta, Lesya Agness Khayatun Yuditya, Nanda Andrian Hidayah, “Laporan Akhir Program Kreativitas Mahasiswa Biobutanol Dari Limbah Tahu: Alternatif Aditif Pada Bensin Sebagai Biofuel Indonesia,” Inst. Pertan. BOGOR, pp. 1–16, 2013.

L. Pudjiastuti et al., “Modelling and simulation of multicomponent acetone-butanol-ethanol distillation process in a sieve tray column,” Heliyon, vol. 7, no. 4, p. e06641, 2021, doi: 10.1016/j.heliyon.2021.e06641.

L. S. Achmad Mostafa, E.Gumbira Sa’id, Ono Suparno, “Metode Pemisahan Campuran Aseton-Butanol-Etanol Hasil Fermentasi Secara Distilasi Bertingkat.” Fakultas Teknologi Pertanian IPB Bogor.

I. Patraşcu, C. S. Bîldea, and A. A. Kiss, “Eco-Efficient Butanol Separation In The Abe Fermentation Process,” Sep. Purif. Technol., vol. 177, pp. 49–61, 2017, doi: 10.1016/j.seppur.2016.12.008.

N. Qureshi and H. P. Blaschek, “Recent advances in ABE fermentation: Hyper-butanol producing Clostridium beijerinckii BA101,” J. Ind. Microbiol. Biotechnol., vol. 27, no. 5, pp. 287–291, 2001, doi: 10.1038/sj.jim.7000114.

I. J. Sidabutar, A. Widyasanti, S. Nurjanah, B. Nurhadi, T. Rialita, and E. Lembong, “Kajian Rasio Refluks Pada Isolasi Beberapa Senyawa Minyak Nilam (Pogostemon Cablin Benth) Dengan Metode Distilasi Fraksinasi,” J. Ilm. Rekayasa Pertan. dan Biosist., vol. 8, no. 1, pp. 71–78, 2020, doi: 10.29303/jrpb.v8i1.160.

R. K. Sinnott, Chemical Engineering Design Volume 6 4th edition, 4th ed. Oxford: Elsevier Butterworth-Heinemann., 2005.

Christie J. Geankoplis, Transport Processes and Unit Operations, Third Edit., vol. 49, no. 9. 1994.

T. K. D. C. freshwater Ross, Chemical Engineering Data Book. Leonard Hill (Books) Limited, London, 1958.

G. Lodi, G. De Guido, and L. A. Pellegrini, “Simulation and energy analysis of the ABE fermentation integrated with gas stripping,” Biomass and Bioenergy, vol. 116, no. June, pp. 227–235, 2018, doi: 10.1016/j.biombioe.2018.06.012.

E. J. Seader, J.D., Henley, Separation Process Principles, second ed. John Wiley and Sons, Inc. United States of America, Second Ed. John Wiley and Sons, Inc. United States of America., 2006.

D. A. Rahman, Rizki Aulia and Kurniawan, “Pengukuran Kesetimbangan Uap-Cair Sistem Biner Etanol + 2-Butanol Dan Aseton + 2-Butanol, Serta Sistem Terner Etanol + Aseton + 2-Butanol Pada Tekanan 101.33 Kpa,” Undergrad. thesis, Inst. Teknol. Sepuluh Nop. Surabaya., 2014.

D. Hartanto, “Review Model dan Parameter Interaksi pada Korelasi Kesetimbangan Uap-Cair dan Cair-Cair Sistem Etanol (1) + Air (2) + Ionic Liquids (3) dalam Pemurnian Bioetanol,” J. Rekayasa Proses, vol. 8, no. 1, pp. 1–11, 2014, doi: 10.22146/jrekpros.5017.

E. D. Setiawati, “Pengukuran Dan Prediksi Kesetimbangan Uap-Cair Sistem Experiment And Prediction Of Ternary Vapor-Liquid Equilibrium For Alcohols + Glycerol + Water Systems,” 2015.

K. I. M. AL-MALAH, “Aspen Plus Chemical Engineering Textbook.” p. 623, 2017.

J. A. Marlatt and R. Datta, “Acetone‐Butanol Fermentation Process Development and Economic Evaluation,” Biotechnol. Prog., vol. 2, no. 1, pp. 23–28, 1986, doi: 10.1002/btpr.5420020106.

S. Skjold-Jprgensen, B. Kolbe, J. Gmehling, and P. Rasmussen, “Vapor-Liquid Equilibria by UNIFAC Group Contribution. Revision and Extension,” Ind. Eng. Chem. Process Des. Dev., vol. 18, no. 4, pp. 714–722, 1979, doi: 10.1021/i260072a024.

Fitriana, “Pengaruh Kenaikkan Reflux Ratio Terhadap Kebutuhan Panas Pada Kolom Distilasi Dengan Distributed Control System (Dcs),” 2010.

J. M. Coulson, R. K. Sinnott, and J. F. Richardson, “Coulson & Richardson’s Chemical Engineering, Volume 6,” p. 1045, 1999, [Online]. Available: http://books.google.co.uk/books/about/Coulson_Richardson_s_Chemical_Engineerin.html?id=H-JGAAAAYAAJ&pgis=1.

C. Irawan and I. Nata, “Kondisi Optimum Pemisahan Aseton Dari Campuran Aseton-Etanol-Air-n–Butanol Dengan Kolom Distilasi Vacuum,” Infoteknik, vol. 6, no. 1, pp. 1–12, 2005.

R. K. Sinnott, Chemical Engineering Design Volume 6 4th edition, 4th ed. Oxford: Elsevier Butterworth-Heinemann., 2005.

J. Gilbert and S. Martin, “8.2 Infrared (IR) Spectroscopy,” Exp. Org. Chemestry, pp. 240–260, 2011.

Refbacks

  • There are currently no refbacks.